Board Setup

How to Level a Dartboard on the Wall

Level a dartboard by checking the line through the bull from 6 to 11, and the vertical from 20 to 3. Learn the segment layout and how to rotate the board.

On this page
  1. The short answer
  2. Learn the layout
  3. Check the board is level
  4. Check the board is plumb
  5. Rotate the board to centre the 20
  6. Cabinets
  7. Why it matters
  8. Recheck after play
  9. Mistakes to avoid

The short answer

Lay a spirit level across the bull, through the centres of the 6 and the 11, to check the board is level. Then check the line from the 20 down through the bull to the 3, to confirm the board face is plumb.

Learn the layout

Once you know where the numbers sit, the checks are easy to follow:

  • The 20 is at 12 o’clock, centred above the bull. On most boards the 20 segment is black.
  • The 6 is at 3 o’clock.
  • The 11 is at 9 o’clock.
  • The 3 is at 6 o’clock, directly below the 20.

Going clockwise from the top, the full number order is: 20, 1, 18, 4, 13, 6, 10, 15, 2, 17, 3, 19, 7, 16, 8, 11, 14, 9, 12, 5.

Check the board is level

Hold a spirit level across the bull so that it touches the centres of the 6 and the 11. The line between those two numbers is horizontal when the board is level. Adjust the board until the bubble is centred.

Check the board is plumb

A board can be level across the bull and still lean forward or back. To check, run a plumb line or a vertical level from the centre of the 20, through the bull, down to the 3. The face should be vertical, not tilted. A spirit level held against the face of the board is a quick way to check this.

Rotate the board to centre the 20

A board on a centre bracket can turn after it is hung. Turn it until the 20 sits centred at the top, then tighten the stabilising brackets so it stays put.

Some boards have a removable number ring. If you rotate the board, set the ring so the 20 lines up with the dark 20 segment, otherwise the numbers will not match the segments.

Cabinets

Level the cabinet first, then align the board inside it. A cabinet that is out of level will make the board look tilted, even if the board is fixed correctly. See the cabinet and surround guide.

Why it matters

A tilted board shifts the targets, so the same aim lands in a different place. Consistent throws need consistent targets, so it is worth getting the level right at the start. The dartboard height guide explains how to set the bull height before you level it.

Recheck after play

Impacts can loosen brackets, and a board can creep over time. Check the level every few weeks, and after anyone has knocked or leant on the board. Retighten the brackets if the board has moved.

Mistakes to avoid

  • Levelling only the number ring. The ring can be fitted out of line with the segments, so check the board.
  • Trying to level the edge of the board. A round board has no edge to level, so use the bull and the 6 and 11 line.
  • Thinking a slight tilt does not matter. It shifts the targets and makes throws less consistent.
  • Forgetting the face can be out of plumb. The 20 can be centred while the board still leans.

For the full sequence of the setup, see the dartboard setup guide.

The complete guide to board setup

How to Set Up a Dartboard: Height and Throwing Distance
Read the guide

Keep exploring

Guides from other topics

All topics →