Board Setup

Dartboard Lighting: How to Light Your Board Properly

Light a dartboard evenly to avoid shadows and glare. Compare ring lights, arm-mounted lights and overhead spotlights, and see where to place them.

On this page
  1. The short answer
  2. Why light matters
  3. Ring lights
  4. Arm-mounted and open-front lights
  5. Overhead spotlights
  6. Colour and brightness
  7. Power and cables
  8. Placement
  9. Mistakes to avoid

The short answer

Aim for even, shadow-free light across the whole face of the board. A ring light around the board is the simplest option. Two spotlights, angled from the front and above and set on different sides, also work well. Keep the light out of your eyes and leave the room light on.

Why light matters

Light affects how well you see the segments. A single light from one side or straight above casts shadows across the board, and darts can throw their own shadows onto the numbers. Harsh glare from a glossy surface makes the board hard to read, and poor light can cause eye strain over a long session.

Ring lights

A ring light mounts around the board and lights it evenly from all sides, which removes most shadows. Check that the ring fits your board and surround, because compatibility varies by brand. Examples include the Target Corona Vision, the Winmau Polaris and Unicorn LED systems, though models change often.

Arm-mounted and open-front lights

Some lights sit on an arm or a rail in front of the board. Open-front designs leave the bottom clear, so you can reach your darts without bumping the light. Some use magnetic mounts and a foldable rail, which helps if you need to move the set-up. Check that the arm does not sit in the path of your darts.

Overhead spotlights

Two or more spotlights angled from in front and above, aimed from different sides, light the board without a single hard shadow. A single spotlight from one side, or straight above the board, creates the shadows you are trying to avoid.

Colour and brightness

Neutral to cool white light, roughly 4000 to 6000 K, is commonly recommended, though preferences vary. Avoid coloured bulbs, because they can change how the segments look. Brighter is not always better. Glare and hot spots make the board harder to see, so choose a light with a soft spread.

Power and cables

Ring lights use a mains adaptor, USB or batteries, depending on the model. Route the cables away from the throw lane and the floor, so nobody trips over them. A cable that runs across the lane is a hazard, not just a nuisance. If you use a camera scoring system, see which darts auto scorer is best for what it needs from your lighting.

Placement

Keep lights out of the thrower’s line of sight, because light in the eyes reduces accuracy. Avoid glare from glossy surfaces near the board. Keep the room light on, so the oche and the floor stay visible. Lights do not change the throw distance, which is still measured from the face of the board. See the oche distance guide.

Mistakes to avoid

  • Thinking a ceiling light alone is enough. It usually leaves shadows across the board.
  • Thinking brighter is always better. Glare and hot spots hurt visibility.
  • Thinking a ring light fits every board. Check the fit with your board and surround. The cabinet and surround guide covers fitting a surround.
  • Assuming light colour has a fixed rule. Tournaments vary, so choose a neutral white for home play.

For the rest of the set-up, see the dartboard setup guide. For the cabinet case, see the cabinet and surround guide.

The complete guide to board setup

How to Set Up a Dartboard: Height and Throwing Distance
Read the guide

Keep exploring

Guides from other topics

All topics →