Rules

Bounce-Outs in Darts: Do They Count?

Steel-tip bounce-outs score zero and are not rethrown, while electronic boards differ. Here is what counts, why they happen and how to cut them down.

On this page
  1. The short answer
  2. What counts and what does not
  3. Why bounce-outs happen
  4. How to cut down on bounce-outs
  5. Bounce-outs in special cases
  6. Common misconceptions
  7. Safety
  8. Where to go next

The short answer

On a steel-tip board, a dart that bounces out or falls out before it is collected scores zero. It is not rethrown, but it still counts as one of the three darts thrown. On an electronic board, a dart that registers before it falls out usually counts, although league rules can differ.

What counts and what does not

Steel-tip boards

Situation Score
Dart lands in a segment and stays in the board until collected Counts
Dart lands in a segment, then bounces out Zero
Dart falls out on its own before it is collected Zero
Dart is knocked out by a later dart Zero
Dart sticks into another dart without touching the board Zero

The rule in practice is that a dart must stay in contact with the board until the player collects it. Players usually collect darts after the score has been agreed.

Electronic boards

On an electronic board, the machine scores each dart when it registers on a segment. A dart that registers and then falls out usually still counts. A dart that sticks in the board but does not register normally scores zero.

League rules set the details. Most leagues treat the machine’s reading as final, unless the rules allow a correction. See soft-tip and American darts rules for more on electronic scoring.

Why bounce-outs happen

  • Wires and staples: a dart that hits a wire or a staple can deflect out of the board.
  • Worn or blunt points: a dull point grips less and bounces out more easily.
  • The back of another dart: a dart that lands on the barrel or flight of another dart can bounce.
  • Loose wires: wires that have moved or loosened change where darts land and how they deflect.

For more on wires, see darts hitting the wire.

How to cut down on bounce-outs

  • Sharpen points: resharpen or replace worn points. Many players check their points regularly.
  • Choose a staple-free board: with no staples in the scoring area, there are fewer things to deflect a dart.
  • Try moveable-point darts: some point designs retract slightly on impact, which can reduce bounce-outs.
  • Rotate the board: many players rotate the board so the wear spreads across the segments.
  • Keep the wires tight: tighten or replace the spider if it moves.

Bounce-outs in special cases

  • Bull-off: a bounce-out in the bull-off is usually rethrown, but the rules vary. See who throws first in darts.
  • Pub rules: some pubs allow a rethrow as a house rule. That is a local arrangement, not the standard rule, so agree it with your opponent before the match.

Common misconceptions

  • “A bounce-out can be rethrown in steel-tip darts.” Under the standard steel-tip rules, it cannot.
  • “A dart that clearly landed in a segment still counts.” Once it falls out before it is collected, it scores zero, even if it landed clearly in a treble.
  • “Electronic and steel-tip boards work the same way.” They differ, as described above.

Safety

Do not try to catch a dart as it falls. Let it drop, then collect it once the score has been agreed.

Where to go next

The complete guide to rules

Darts Rules: How the Game Works From Throw to Checkout
Read the guide

Keep exploring

Guides from other topics

All topics →