Darts, Shafts and Flights

What is the best weight for steel tip darts?

For most players the best steel-tip weight is 22–24 g, with 23 g a common middle ground. Here's how weight changes your throw and how to test it.

On this page
  1. Short answer: 22–24 g suits most players
  2. Rules and typical ranges
  3. How weight changes the throw
  4. Why 24 g is so common
  5. Tungsten keeps a heavier dart slim
  6. How to test weights
  7. Signs your weight may be wrong
  8. Setup matters too
  9. Soft-tip darts are lighter
  10. Common mistakes

Short answer: 22–24 g suits most players

For most steel-tip players, the best starting weight is 22–24 g, and 23 g is a popular middle ground. Lighter or heavier darts suit some throws better, so test a few weights before you settle on one.

Rules and typical ranges

Under PDC and WDF rules, steel-tip darts can weigh up to 50 g and measure up to 30.5 cm (12 in) overall. Typical adult darts run from about 18 g to 30 g, and most players use 20–26 g.

How weight changes the throw

Weight Tends to suit Watch for
21 g and under Looser, more lofted throws Needs a more precise release; can feel twitchy
22–24 g Most players, as a balanced starting point Few obvious drawbacks for most throws
24 g and up Firmer, flatter throws; resists deflection Can tire the arm over long sessions, especially at 30 g and above

These are general tendencies, not rules. Your throw matters more than the number on the barrel.

Why 24 g is so common

A 24 g dart tends to suit a firmer, flatter throw, and it resists deflection better than a lighter one. Many players find it a good balance between control and effort. If you throw quickly and the weight pulls your arm down, a dart in the 22–23 g range may feel better.

Tungsten keeps a heavier dart slim

The same weight takes up far more space in brass than in tungsten. A 24 g dart in 90% tungsten has a slim barrel. A 24 g brass dart is much thicker, and thick barrels deflect more and can block the treble. Tungsten grade and weight therefore go together when you choose. See steel versus brass darts for the material trade-off.

How to test weights

  1. Try darts in steps of 1–2 g. Small changes are easy to feel.
  2. Borrow test sets. Many shops and clubs keep darts of different weights.
  3. Throw for a full session at a comfortable pace, rather than judging after a few darts.
  4. Notice whether your throw settles and whether you’re making fewer corrections.

Give a new weight several sessions before you decide. Switching every week makes it hard to tell what is working.

Signs your weight may be wrong

  • Your arm tires, or your throw gets shaky late in a session. Consider a lighter dart.
  • Darts feel insubstantial, snatch in the hand, or fly erratically. Consider a heavier dart.
  • Darts keep landing low or high despite consistent technique. Check the setup first, then the weight.

Setup matters too

Flight size and shaft length change how a dart balances and enters the board. Larger flights and longer shafts usually suit heavier darts for stability, while smaller flights often suit lighter darts. Look at the flight shapes guide and the shaft guide when you tune your weight.

Soft-tip darts are lighter

Soft-tip darts typically weigh 16–20 g. Many leagues and electronic machines cap darts at 20 g, so check the rules first. For beginner soft-tip sets, see best soft-tip darts for beginners.

Common mistakes

  • Assuming heavier is more accurate. It isn’t by default.
  • Copying a professional’s weight without testing it.
  • Buying a set before you’ve tried a few weights.

For a wider buying guide, see the steel-tip darts buying guide.

The complete guide to darts, shafts and flights

Best Steel-Tip Darts: Tungsten Darts Buying Guide
Read the guide

Keep exploring

Guides from other topics

All topics →