Darts, Shafts and Flights

Are steel or brass darts better?

Steel-tip describes the point, not the barrel. Compare brass, nickel-silver and tungsten barrels on thickness, durability and cost to see which suits you.

On this page
  1. Short answer: neither is better in every case
  2. What “steel-tip” actually means
  3. Barrel materials compared
  4. Thickness and grouping
  5. Durability and cost
  6. Which should you choose?
  7. Common misconceptions
  8. Board type and safety

Short answer: neither is better in every case

The two terms describe different things. “Steel-tip” refers to the point. The barrel can be brass, nickel-silver, tungsten or, rarely, steel. Tungsten is usually the better choice for tight grouping and durability. Brass is the cheapest and is fine for casual play and beginners on a budget. The right choice depends on your budget, how often you play and the board you use.

What “steel-tip” actually means

A steel-tip dart has a fixed steel point designed for sisal (bristle) boards. The barrel is a separate choice. So “steel darts” doesn’t mean the barrel is steel, and “brass darts” usually means a steel-tip dart with a brass barrel.

Barrel materials compared

Material Approximate density Typical use Notes
Brass about 8.5 g/cm³ Casual play, pubs, beginners on a budget Cheapest; softer; dents and wears faster; plating rubs off
Nickel-silver about 8.7 g/cm³ Budget to mid-range More durable than brass at a similar price and thickness
Steel about 7.9 g/cm³ Rare Similar density to brass
Tungsten alloy (80–97%) about 19.3 g/cm³ for pure tungsten; alloys are lower Serious and league players Slimmer barrel at the same weight; durable

Thickness and grouping

Brass and steel barrels take up roughly twice the volume of tungsten at the same weight, so they are noticeably thicker. Thick barrels deflect more and can block the treble or bull when you group darts. Tungsten keeps the barrel slim, which matters once you’re placing several darts close together.

Durability and cost

  • Brass: the cheapest option, with sets often around $10–25. It is softer, and it dents and wears faster. The grip pattern can wear smooth.
  • Nickel-silver: more durable than brass at a similar price and thickness.
  • Tungsten: more expensive, with 80–90% sets often around $30–90. The barrel and grip pattern last longer.

Prices vary by region and year, so treat them as rough guides.

Which should you choose?

  • Casual pub play or a first set on a budget: brass or nickel-silver is fine.
  • Learning to group darts: an 80–90% tungsten barrel gives a slimmer barrel at the same weight.
  • Regular league play: tungsten, typically 90% or higher, is the common choice.

Whichever you pick, the weight is a separate decision. See the steel-tip weight guide for how to choose one.

Common misconceptions

  • Brass is not worse for learning. Technique matters more than material.
  • Heavier brass is not more accurate. It is just bulkier.
  • Brass is not banned in competition. Any material within the weight and length rules is allowed.

Board type and safety

Steel-tip darts belong on sisal boards and should not be thrown at electronic boards. Soft-tip darts are for electronic boards. Steel points are sharp, so store darts in a case. For soft-tip options, read best soft-tip darts for beginners. For a full buying guide, see steel-tip darts buying guide.

The complete guide to darts, shafts and flights

Best Steel-Tip Darts: Tungsten Darts Buying Guide
Read the guide

Keep exploring

Guides from other topics

All topics →