Darts, Shafts and Flights

Dart Flight Shapes and What They Do

Dart flights add stability and drag. Compare standard, slim, kite and pear shapes and materials, and see how flight size pairs with dart weight and throw.

On this page
  1. Short answer: bigger flights stabilise, smaller ones speed up
  2. Why flights matter
  3. Common shapes
  4. Stem length and entry angle
  5. Materials
  6. Folded or moulded
  7. Choosing flights: a practical approach
  8. Common misconceptions
  9. When to replace

Short answer: bigger flights stabilise, smaller ones speed up

Flights stabilise a dart by adding drag at the rear. Larger flights add stability and lift, and suit slower or more lofted throws. Smaller flights reduce drag, so they suit faster, flatter throws and tighter groupings. Shape names aren’t standardised across brands, so compare the size and shape on each listing.

Why flights matter

  • They keep the dart pointing point-first in flight.
  • A bent, split or creased flight changes the flight path, so replace it.
  • A flight can’t fix an inconsistent throw. Technique comes first.

Common shapes

Shape Relative size Character Tends to suit
Standard Largest common shape Most stable and lift, slower Beginners, slower or lofted throws, scattered groups
Shape (small standard, No. 6 style) A little smaller than standard Stable, a bit faster Players moving on from standard
Slim Narrow Least drag, fast and flatter, less forgiving Fast, flat throws; tight groupings for steady throwers
Kite Middle A balance of stability and speed Medium-speed throwers still settling their style
Pear Rounded, moderate to large Moderate speed, less stable than standard Medium-speed throwers
Fantail and novelty shapes Varies Fine-tunes feel and landing Experienced players making small adjustments

The “No. 6” and “No. 2” names vary between brands, so check the listing’s dimensions.

Stem length and entry angle

Flight size and stem length work together. As a general tendency, larger flights or shorter stems raise the tail of the dart on entry, while smaller flights tend to land flatter. Players often report that stem length also affects the entry angle, so test one change at a time. The shafts guide covers stem length in detail.

Materials

  • Standard polyester: often about 75–100 microns thick. Affordable and flexible.
  • Thicker polyester: about 100–150 microns. More durable, with slightly more air resistance.
  • Rip-stop nylon: tough, and a good choice for frequent use. Thicker flights may need the shaft slots opened slightly to fit.
  • Moulded one-piece flights, such as Fit Flight, L-Style and Cosmo: they fit their own matching shafts.
  • Textured or dimpled flights: said to give more consistent airflow. The benefit is debated.

Folded or moulded

Folded flights are made from four sheets glued together. They lie flat for easy carrying, and they come in a wide range of designs. They can be nicked by other darts.

Moulded flights are one piece, so they are stiffer and hold their shape. They usually fit only the shafts they were made for.

Choosing flights: a practical approach

  1. If your groups are scattered, start with a standard flight. It gives the most stability.
  2. Pair size with weight. Heavier darts usually suit larger flights, and lighter darts often suit smaller ones.
  3. Change one flight at a time, and note the difference over a full session.
  4. Keep the three darts in a set matched.

For a sense of how flight and weight combine, see what dart weight professionals use.

Common misconceptions

  • Bigger flights don’t always mean more accuracy. They trade speed for stability.
  • Thicker flights are for durability, not stability.
  • Shape names aren’t standardised between brands.

When to replace

Replace a flight that is bent, split, creased or no longer grips in the slots. For the steps, read how to replace dart flights and shafts.

The complete guide to darts, shafts and flights

Best Steel-Tip Darts: Tungsten Darts Buying Guide
Read the guide

Keep exploring

Guides from other topics

All topics →