How to clean darts?
To clean darts, take off the flights and shafts, wash the barrels in warm water with a drop of washing-up liquid, brush the grooves with a soft toothbrush, then dry everything completely. For greasy build-up on uncoated barrels, a little isopropyl alcohol on a cloth helps. Coated barrels get soap and water only.
What you need
- Warm water and a drop of mild washing-up liquid
- A soft toothbrush
- Lint-free cloths or a towel
- Isopropyl (rubbing) alcohol, for uncoated barrels only
- A cotton bud or toothpick, for the threads
- A dart sharpener for steel points
Step by step
- Take the darts apart. Remove the flights and shafts, and clean them separately. If your points are interchangeable, unscrew them.
- Soak the barrels briefly. Put the barrels in warm water with a drop of washing-up liquid for a few minutes. Don’t leave them for hours.
- Brush the grip. Scrub along the grooves and knurling with a soft toothbrush to lift grime and chalk.
- Rinse and dry completely. Rinse in clean water and dry with a lint-free cloth. Let the barrels air dry upright, and make sure the threads are fully dry before you reassemble.
- Clean the threads. Use a cotton bud or toothpick to clean the shaft threads and the thread hole in the barrel.
- Remove greasy film (uncoated barrels only). Wipe with isopropyl alcohol on a cloth or cotton bud, then dry straight away.
Different barrel materials
- Tungsten resists corrosion and can be cleaned the same way as the steps above.
- Brass and nickel-silver can tarnish. A gentle metal polish can help. Use it sparingly and wipe it off fully.
- Coated or painted barrels (PVD, titanium nitride, painted or black coatings) need soap, water and a soft cloth only. No polish, no alcohol and no abrasives.
Points, grip and flights
- Steel points: wipe them clean. Remove burrs with a sharpener, using light, circular strokes. Keep the points rounded, not needle-sharp.
- Grip wax or chalk: on uncoated barrels, remove old residue with alcohol before you reapply.
- Soft tips: replace bent or broken tips rather than straightening them. Check that they screw in fully.
- Flights: wipe them with a damp cloth. Replace any that are torn or creased.
How often to clean
Wipe darts after each session. Do a deeper clean when the grip feels slippery. How often that happens depends on the player and how much they sweat.
Mistakes to avoid
- Steel wool, sandpaper or abrasive pads, which strip the grip and coatings
- The dishwasher, or soaking darts with plastic or aluminium shafts attached
- A pointed knife in the knurling
- Chasing shine. Texture gives you grip, not gloss
Hold darts by the barrel, points away from you, when you scrub or sharpen them.
For the rest of your kit, see what every dart player needs.